What Kind Of Shoes Should I Buy For Spring Festival?

< p > this year, celebrate your holidays. What do you buy for yourself? < a href= "http://sjfzxm.com/DESIGN/designer/index.asp" > shoes < /a >, buy a pair of leather, but how to choose good leather shoes, Xiaobian to teach you.

< /p >

< p > natural leather (that is, genuine leather) has pores. When you can't see clearly, you can use your fingers to press the skin to see if there is a fine leather pattern.

After the fingers leave the skin, the fine lines disappear, the skin is full and elastic, and the natural leather is better.

If there is no fine grain, most of them are not natural leather.

< /p >

< p > another notable feature of natural leather is that there are a few minor defects in the inner surface of natural leather, such as uneven skin width, bright furuncle and tick boil.

There are three layers of cross section of natural leather, which are dense and different. The epidermis is fine and flexible, and there are dense dermis in the middle. The lower layer is loose meat surface fiber layer, and there is no obvious demarcation between layers.

< /p >

< p > leather shoes are used as reinforcing materials to prevent extended deformation and improve foot touch.

It is required that the shoe lining material has fine touch, breathability, excellent moisture absorption and moisture retention, and no color loss.

The middle and upper leather shoes are made of natural leather and cotton cloth.

If the vamp is natural leather, the shoe lining is artificial leather, it can only be regarded as the middle and low grade shoes. Most consumers easily ignore the identification of shoe lining materials.

< /p >

< p > to see if there is a break between the upper and the bottom joints, whether the upper suture is regular and regular, whether the bonded parts of the leather shoes are smooth, no ridge, no cracks and glue opening.

< /p >

< p > handle the inner cavity of the shoe with your hands, and see if the part of the contact foot is uneven on the inside of the shoe and < a href= "//www.sjfzxm.com/news/index_c.asp" > < /a >, so as to improve the touch of the foot.

< /p >

< p > use hand to pinch the heel of the upper to see if it is stiff and elastic so as not to damage the ankle.

< /p >

< p > press the bottom of the waist of the shoe to see whether it is hard or not, so as to keep the shoe upright and not to move.

< /p >

< p > use the middle finger finger to insert the bottom of the shoe tip to see if the height of the front seat is suitable.

When the tip of the shoe tip is just enough for the middle finger to indicate the belly thickness, it indicates that the toe of the shoe toe is right; the stability of the shoe toe is too low when the toe is too large; the shoe is worn quickly before the shoe is pushed, and the shoe is easily deformed and the foot is easy to fatigue.

< /p >

< p > hold your shoes with your hands to see if the shoe soles and the heels are touching smoothly.

Light the sole and heel lightly against the side of the table or counter, so that the side of the shoe is upwards to view the contact area of the sole.

It is better to contact the side of the table with the shoe sole (the sole of the sole) and the whole heel plane, otherwise the shoe will easily deform and drop the heel.

< /p >

< p > put the shoes on the table, and observe them from two directions before and after.

From the front of the shoe, look at the size of the inside and outside edges of the sole from the top of the table. There should be little difference between them, so as to maintain balance and consistency.

< /p >

< p > with the index finger erect on the outside side of the shallow shoe, look at the upper ankle height.

The fingertips touch down the bottom of the shoe, let the index finger close to the upper ankle, and see whether the second finger knuckle line of index finger is highly consistent with that of the outer ankle.

General life shoes, social etiquette shoes, fashion shoes, slightly lower than the index finger second finger knuckle line is good; low waist sports shoes and casual shoes are soft mouth structure, the external ankle height can slightly higher than the index finger second finger joint line.

< /p >

< p > overlooking the vamp from up to down to see the symmetry of the shoe parts and the deformation of the shoe outline.

Take the straight line between the tip of the shoe and the middle point of the heel as the symmetrical axis to see whether the components on the vamp are symmetrical or not, so that the inside and outside sides do not symmetrically move forward and backward; the contour of the shoe should be enclosed in the shoe, smooth and round; the twisted shoe shaped leaf is inferior shoes.

< /p >

< p > > a href= "//www.sjfzxm.com/news/index_f.asp" > outer sole < /a >.

Rubber soles are soft, elastic, skid resistant, wear resistant, heat-resistant, and cold resistant. But the texture is heavy. The leather soles are light, stiff, wearable and resistant to twists and turns, but are of poor elasticity and are not too slippery. Plastic soles are wear-resistant and elastic, but they are hard, heat-resistant and cold resistant.

< /p >