Summary Of Awareness Of Green Supply Chain Management In Textile Enterprises

The "eighteen major" reports put forward the construction of "beautiful China" and take the road of ecological civilization. Environmental protection has risen from the corporate level to the whole national and social level. Ecological construction is the social responsibility of enterprises, and more and more enterprises have begun to act positively. Besides simple terminal management and treatment, environmental protection should pay more attention to solving problems from the source. For example, we should adopt cleaner production technology, clean raw materials and energy, and more efficient equipment to produce clean products. In the production process, enterprises should not neglect small details, such as eliminating waste additives, fuel and energy, improving the utilization efficiency of equipment, improving the management level, and improving employees' awareness of environmental protection. Start with every little bit and put environmental protection into practice. At the policy level, the relevant state departments have also given a lot of support. For example, there are many plans for cleaner production technology implementation in key industries of the Ministry of industry and information technology. Spin Industry related, these technologies are very effective.

　　 De cotton group: reformulated Textile industry Access standard

What is "green production": through advanced equipment, precise technology and effective management, we control the pollution and excessive consumption in the production process, and have achieved the goal of green environmental protection, energy saving and consumption reduction.

Implementation and application is to prevent material loss and comprehensive utilization of waste in the production process; two, vigorously improve the equipment and process, and develop an economic and more environmentally friendly production process; three, improve product design and adjust the product mix; four, vigorously develop energy saving and emission reduction and small change, and advocate green production.

Specifically, the group set up a special energy management and utilization analysis group to analyze and summarize the operation and power consumption of the equipment, to explore the economically feasible energy saving operation mode, to continuously improve the energy utilization rate, to set up an energy lab, to carry out the energy dynamic monitoring of all the large power equipment in the enterprise, to monitor the cost of a single production of various production processes, to do a good job in the energy use and cost control of enterprises, to carry out scientific transformation of energy saving equipment, to effectively reduce production costs, to change the concept, and to introduce the concept of energy efficiency in the original thinking of energy saving and consumption reduction, and to consider and explore the energy saving and economic operation mode of equipment in a higher perspective.

In order to ease the financial pressure on the introduction of large-scale energy saving production equipment and technology, enterprises are also trying more ways of cooperation. It is hoped that the state and the government will have more policy support and financial support, and expect more and better energy saving products with high quality and low cost to be available, so as to avoid the situation of saving energy and saving money, thus preventing the burden of enterprises. In the future, we will make further efforts in equipment transformation, process flow, management methods and ways of cooperation. It is hoped that the state can consider from the perspective of higher strategic development, reformulate the entry standards of textile industry, strictly control the scale of the textile industry, form a healthy and healthy production competition mechanism, prevent unordered and excessive scale expansion.

　　 Feng Bamboo Textile: increase support for advanced equipment

What is "green production": taking energy conservation, consumption reduction and pollution reduction as the goal, management and technology as the means to implement pollution control in the whole process of industrial production and minimize the amount of pollutants generated.

Implementation and application can be naturally degraded by eco environmental protection. textile Raw materials, dyes and chemicals that meet the requirements of ecological textiles are selected, and environmentally friendly and water-saving dyeing auxiliaries are applied to avoid the use and discharge of toxic and harmful substances. Developing and applying low consumption watermark to dye new technology and new products, reduce energy consumption and water consumption, and reduce sewage discharge. We should promote the use of low bath ratio dyeing machines instead of dyeing equipment with large consumption of water, and carry out technological transformation of existing equipment to reduce the consumption of dyes, auxiliaries, steam, and reduce water consumption and wastewater discharge. In terms of green technology, biological enzyme pretreatment technology, air mist dyeing technology, and high efficiency water saving and low temperature dyeing and post-treatment technology of cotton can reduce the bath ratio to 1: 4, and greatly reduce water consumption. Steam turbine heating water transformation and dyeing cylinder cooling water waste heat utilization will reduce the process water consumption and energy consumption during heating process. In addition, reverse osmosis membrane wastewater reuse technology is also adopted.

The implementation of green supply chain management is inseparable from the application of advanced equipment. At present, most of the high-end equipment in the printing and dyeing industry are imported products, while the prices of similar products in China are relatively low, which greatly affects the enthusiasm of enterprises to introduce advanced equipment. It is suggested that relevant government departments should increase financial support for enterprises to purchase advanced equipment, and at the same time, introduce relevant policies to enhance the overall manufacturing technology level of key equipment in the printing and dyeing industry. At the same time, we should increase the intensity of green procurement, and we can only enter the company through the inspection and approval of authoritative bodies. We should attach importance to scientific management in the process of technology application, give full play to the maximum energy saving and emission reduction effect of equipment, and improve the utilization efficiency of resources and energy.

Changshan shares: Research on solar power and other new topics of consumption reduction

What is "green production": for Cotton textile enterprises It should be through transformation and upgrading, relying on meticulous management and technological innovation to produce green products that meet the health concept with the lowest energy consumption.

The executive and application cotton company uses the microcomputer monitoring system of steam stations in the thermal power station, analyzes and adjusts the steam consumption of the enterprises according to the curve diagram, adjusts the steam consumption of the plant in time, adjusts the operation of the single and double pipes in time, adjusts the steam parameters of the meters, reduces the use of steam humidification in the air-conditioned room, and improves the utilization rate of the internal steam by utilizing the residual heat between vehicles. The fifth branch uses steam return water to heat the bathroom water. Hengsheng branch transforms the traditional light tube into LED light source tube. After transformation, it saves 755 thousand kilowatt hours of electricity, which is equivalent to about 86.7 tons of standard coal, and energetically carries out power harmonic control. By installing 5 harmonic filters on the transformer, it can effectively absorb the harmonic current generated by the load by more than 50%, and at the same time, improve the power factor of the system. Hengsheng has transformed the water tank of softened water, saving 360 labor and saving 36 tons of salt. Changshan stock has also continued to strengthen the reuse of air-conditioning water, transform the closed cycle of air-conditioning and water, make full use of the refrigeratory to return to the water tank, and achieve the closed cycle of air-conditioning water throughout the year. In March this year, Hengxin company was selected by the Sino German energy efficiency management cooperation project. Hengxin will achieve greater results in improving production technology and equipment management, reducing energy consumption of million yuan output value and improving energy utilization level of enterprises.

With the increase of import looms and high added value orders, some problems such as stopping more platforms, more defects, less efficiency, and higher energy consumption have been highlighted for some time. The key technologies of Changshan stock selection have been tackled. yarn The hairiness of yarn is more than that of Europe, so it is easy to block weft flying in weaving process, thus affecting the efficiency of driving. Through repeated tests and groping, the opening is debugged into elliptical shape, which is conducive to the flight of weft yarn, and the average driving efficiency is more than 90%. Through the process optimization, a series of effective measures such as increasing opening angle and warp tension for the three upright varieties have successfully solved the problem of a large number of shrinkage defects appearing in conventional weaving. At present, all newly built enterprises in Changshan stock have installed solar energy. Besides the convenience of staff bathing, the company is actively studying new topics such as solar power generation, which will reduce energy consumption more effectively.

{page_break}

　　 Su Si shares: pay attention to investment in science and technology to promote the development of new products

What is "green production": Using low carbon and environment-friendly raw materials, energy saving and emission reduction production modes to produce the lowest carbon and environmental protection products, so that consumers can enjoy high-grade green safety products at a low price.

Implementation and application, we directly bought a large number of cocoons in silkworm breeding base. In recent years, the company has invested 1 million 600 thousand yuan and 1 million 780 thousand yuan respectively to build 2800 cubic meters of regulating pool, 300 cubic meters of contact oxidation tower and other equipment, and the sewage treatment capacity has increased from 600 tons per day to 2400 tons. At present, the traditional process of high temperature soaking and degumming is used in the domestic silk spinning process. 20% of sericin from silk spinning raw materials is discharged with industrial waste water, and a large amount of sericin sludge is formed every year, which increases the technical difficulty and processing cost of sewage treatment. The company used steam explosion puffing technology to refine the traditional process, and collaborate with the food College of Jiangnan University to extract sericin and sericin. The annual output of sericin is 200 tons, and sericin is rich in 18 kinds of ammonia acids needed by human body. This technological innovation has reduced the company's monthly water consumption from the previous more than 60000 tons to the current 33000 tons, and the high concentration wastewater has dropped from 850 tons per day to nearly 400 tons now. According to the company's existing sewage treatment equipment, it can be completely processed within 5 hours. The company can reuse these waste water after simple treatment.

In the supply of raw materials, when we set up a silkworm raw material base, there were some villages and towns and villages that destroyed the mulberry, which affected the supply of raw materials to some extent. We promptly passed the help of the county Party committee and the county government and asked them to stop the destruction of mulberry through administrative means, and to punish the villagers severely damaged by mulberry, so as to ensure the smooth operation of sericulture base construction. It is suggested that local governments should increase their efforts to protect sericulture bases, and do not rigidly stipulate sericulture farmers to replace other crops in order to effectively protect the interests of sericulture farmers and enterprises. In the future, the company will increase investment in science and technology funds and continuously develop marketable ones. silk New products improve the economic and social benefits of enterprises.

　 Huafang group: the scattered distribution of member enterprises must be co-ordinate consumption.

What is "green production": through effective thinking innovation, management innovation and technological innovation, and Spin The whole process is further optimized to achieve three goals of energy saving, consumption reduction, optimization of production environment and consumer rights and interests.

In the process of practice and implementation, there are more effective management methods: first, the introduction of external energy audit. As early as the end of 2006, the group completed the energy audit report of the whole group by the Suzhou energy conservation technology service center. The report has also become the only model for the national development and Reform Commission to promote the energy audit of thousands of enterprises nationwide. The group dispatched special personnel to set up energy conservation office, constantly improve the enterprise energy conservation management network, and implement the resource saving responsibility system. In view of the fact that the electricity tariff is the largest energy consumption project of the group and the power accounts for 78.5% of the energy consumption, the first step is to accelerate the transformation of the AC frequency conversion speed regulation for the high-power motor, to install the intelligent power saver for the high-power auxiliary machine (fan), to transform the electric motor to 14000 kilowatts, and to save the electricity rate by more than 20%. At the same time, the 150 thousand ordinary fluorescent lamps are changed to energy-saving lamps, and two items are accumulated about 43000000 degrees. Water saving, fuel saving and other projects have also been accelerated. Two, with the help of professional management platform. For example, in the management of electricity consumption, in order to avoid the waste of electricity in some parts due to the lack of professional and effective management in the process of use, the group joined the Suzhou power demand side management platform, and imported modern electric energy services. Through the "power service platform", it realized "networking, digitalization, specialization and visualization", which enhanced the demand side power management level, and realized the system power saving, management power saving and technology saving.

At present, the group's implementation and promotion of "green production" is mainly based on three aspects of understanding and positioning: first, technological transformation and strengthening management to enhance the utilization efficiency of electricity, water and steam. Two is to improve the workshop production environment, effectively control the workshop summer high temperature, reduce noise in weaving workshop, and create a more comfortable production environment for employees. The three is to control the purification and discharge of dyes and chemicals, auxiliaries and waste water through high standards, effectively protect the rights and interests of consumers, and effectively protect the environment. With the continuous optimization of the regional layout of enterprises, scattered distribution of members' enterprises, how to grasp the state of production and operation and energy consumption of enterprises in real time, and realize the modern energy-saving management and full coverage of green production is a major issue that the group is currently tackling.

{page_break}

　 Ji Hua 3536: technological innovation is not enough enough to affect work efficiency.

What is "green production": green production as a new mode of production management, it takes the concept of green environmental protection as the guiding ideology, prompting enterprises to take the initiative to assume the social responsibility of protecting the environment.

Implementation and application of inter China 3536 Business Suits After purchasing raw materials, the company's technology, quality inspection and other departments also need to inspect the materials in terms of toughness, hardness, pH and other physical and physical aspects, so as to achieve the standard of storage and production, ensure the product's comfort and durability and protect the health of the customers. The company adopts the principle of not wasting the same amount of cloth to replace the original material that can be used. Under the premise of ensuring the quality of products and the requirements of customers, optimize the operation process, and adopt a large number of mold and mould production, reduce the operation process, reduce difficulty and save materials. In 2013, the total purchase amount of the company's military carton was saved by more than 6 yuan compared with last year, which successfully completed the company's requirement of reducing the cost by 3%. The company also installed a central air conditioner in the production unit at the time of rebuilding the new factory after the disaster, which enlarged the area of the room and created a comfortable working environment for the staff. On the transport of products, the company dissolves its own fleet, and chooses the ratio of quality to price before transporting goods. It mainly chooses the mode of transportation by train and vehicle, and realizes the saving and greening of transportation cost.

The company's technology, quality inspection departments and other departments to strictly check the quality of products in each link according to the standards, conduct training guidance for employees, and reduce rework rate. The production workshop has separately formulated the production material collar, saves the reward and punishment system, specially set up the material transceiver from the workshop to the team. In 2012, with the relocation of the new plant after the disaster reconstruction, the company changed the two coal-fired boilers to environmental protection gas-fired boilers. The company is short of technological innovation and efficiency. This year, the training of technical personnel has been strengthened, and funds have been invested in the purchase of tooling templates for the production of machinery and equipment. clothing Production equipment, the production line of scientific and rational modular design, to achieve the purpose of improving quality and efficiency.